Reparação da parede abdominal com membranas acelulares de pericárdio bovino - Parte I - Achados clínicos e radiológicos / Abdominal wall repair with acellular bovine pericardial membranes - Part I - Clinical and radiological findings

Introdução: Reduzindo os índices de recidiva de forma impactante, o emprego de biomateriais como "telas de reforço" na reparação de diferentes defeitos da parede abdominal tornou-se rotina quase obrigatória para o sucesso dessas reparações. A partir da década de 1990 houve a introdução de matrizes biológicas acelulares, iniciando-se assim uma nova era na reparação dos defeitos da parede abdominal. O objetivo é avaliar a funcionalidade do pericárdio bovino acelularizado em reparações da parede abdominal. Método: Trinta pacientes foram submetidos a reparação de defeitos da parede abdominal, com biopróteses acelulares de pericárdio bovino, perfazendo um total de 40 implantes anatomicamente individualizados. O seguimento médio foi de 31 meses, sendo os pacientes avaliados clinicamente e radiologicamente. Em três casos foram feitas biópsias das áreas implantadas permitindo análise histológica do material. Resultados: Não se observou recidiva das herniações em nenhum dos casos, tanto clinica como radiologicamente. Também não houve registro de hematomas, infecções ou qualquer fenômeno de natureza reacional local ou sistêmica. Radiologicamente, não foi possível visualizar as matrizes no local de implantação em qualquer dos períodos de pós-operatório analisados. Conclusão: As matrizes mostraram similaridade às demais membranas biológicas descritas na literatura internacional. Representando uma importante atualização e evolução conceitual, as membranas acelulares de pericárdio bovino podem ser incorporadas ao arsenal terapêutico nas reparações de parede abdominal.

Introduction: Reducing recurrence rates significantly, the use of biomaterials as "reinforcement meshes" in the repair of different abdominal wall defects has become an almost mandatory routine for the success of these repairs. From the 1990s onwards, acellular biological matrices were introduced, thus beginning a new era in the repair of abdominal wall defects. The objective is to evaluate the functionality of the acellularized bovine pericardium in abdominal wall repairs. Method: Thirty patients underwent repair of abdominal wall defects using acellular bovine pericardium bioprostheses, making a total of 40 anatomically individualized implants. The average follow-up was 31 months, with patients being evaluated clinically and radiologically. In three cases, biopsies were taken from the implanted areas, allowing histological analysis of the material. Results: No recurrence of herniations was observed in any of the cases, both clinically and radiologically. There were also no records of bruises, infections or any phenomenon of a local or systemic reaction nature. Radiologically, it was not possible to visualize the matrices at the implantation site in any of the postoperative periods analyzed. Conclusion: The matrices showed similarity to other biological membranes described in the international literature. Representing an important update and conceptual evolution, acellular bovine pericardial membranes can be incorporated into the therapeutic arsenal in abdominal wall repairs.

Reparação da parede abdominal com membranas acelulares de pericárdio bovino - Parte II - Análises histológicas e morfométricas / Repair of the abdominal wall with acellular bovine pericardial membranes - Part II - Histological and morphometric analyses

Introdução: Análise histológica é a principal ferramenta de avaliação de biopróteses acelulares, em sua maioria em caráter experimental. O objetivo é analisar histologicamente a matriz acelular de pericárdio bovino em reparações de parede abdominal implantada em humanos. Método: De uma série de 30 reparações com a membrana, 3 pacientes foram submetidas a revisão cirúrgica não relacionada aos implantes, aos 13, 22 e 23 meses de pós-operatório, obtendo-se biópsias das áreas previamente implantadas. Além da avaliação dos aspectos básicos de biocompatibilidade e neoformação tecidual, as lâminas foram digitalizadas e submetidas a análise computadorizada com o software ImageJ para quantificação da cinética de degradação das membranas, associada à análise da dimensão fractal das amostras. Os valores obtidos para porcentagens de membrana residual tiveram suas médias comparadas por análise de variância (ANOVA) e pelo teste T de Student não pareado, também utilizado para os valores da quantificação da dimensão fractal. Resultados: Foi demonstrada a biocompatibilidade do material, com neoformação tecidual, deposição de colágeno e tecido celularizado de aspecto normal, sem reações locais importantes. Fragmentos residuais da membrana foram quantificados em 40%±7% aos 13 meses, em 20%±6% aos 22 meses e em 17%±6% aos 23 meses de pós-operatório, com a análise da dimensão fractal indicando uma progressiva degradação dos implantes, com significância estatística entre 13 meses e as amostras tardias. Conclusão: Os resultados atestaram a funcionalidade do pericárdio bovino acelular sob diferentes níveis de estresse mecânico nas reparações da parede abdominal em humanos.

Introduction: Histological analysis is the main tool for evaluating acellular bioprostheses, mostly on an experimental basis. The objective is to histologically analyze the acellular matrix of bovine pericardium in abdominal wall repairs implanted in humans. Method: From a series of 30 repairs with the membrane, 3 patients underwent surgical revision unrelated to the implants at 13, 22, and 23 months postoperatively, obtaining biopsies of the previously implanted areas. In addition to evaluating the basic aspects of biocompatibility and tissue neoformation, the slides were digitalized and subjected to computerized analysis with the ImageJ software to quantify the kinetics of membrane degradation associated with the analysis of the fractal dimension of the samples. The values obtained for percentages of residual membrane had their means compared by analysis of variance (ANOVA) and the unpaired Student's T test, also used for the fractal dimension quantification values. Results: The biocompatibility of the material was demonstrated, with tissue neoformation, collagen deposition, and cellularized tissue with a normal appearance without important local reactions. Residual fragments of the membrane were quantified at 40%±7% at 13 months, at 20%±6% at 22 months, and at 17%±6% at 23 months postoperatively, with the analysis of the fractal dimension indicating a progressive degradation of implants, with statistical significance between 13 months and late samples. Conclusion: The results confirmed the functionality of the acellular bovine pericardium under different levels of mechanical stress in abdominal wall repairs in humans.

Perforación colónica por endoprótesis biliar impactada / Colonic perforation due to impacted biliary stent

Introducción. La colocación de endoprótesis biliares es cada día más frecuente por ser actualmente una de las mejores opciones para el tratamiento de patologías de la vía biliar. La migración de las endoprótesis es una de las complicaciones que puede ocurrir en hasta un 10,8 % de los pacientes, pero en muy raras ocasiones llegan a causar una perforación intestinal. Caso clínico. Se trata de una paciente de 61 años, a quien cinco años atrás se le realizó una colangiopancreatografía retrógrada endoscópica por coledocolitiasis. Consultó por presentar dolor abdominal, y al examen físico se encontraron abdomen agudo y plastrón en fosa ilíaca izquierda a la palpación. La tomografía computarizada informó un cuerpo extraño a nivel del colon descendente, con perforación del mismo. Se realizó laparotomía exploratoria y colostomía por perforación del colon sigmoides secundaria a prótesis biliar migrada. Resultados. La paciente evolucionó favorablemente y a los seis meses se realizó el cierre de la colostomía, sin complicaciones. Conclusión. Los pacientes a quienes se les colocan prótesis biliares requieren un seguimiento adecuado para evitar complicaciones que, aunque raras, pueden ocurrir, como la migración intestinal con perforación. El tratamiento de dichas complicaciones se hace por vía endoscópica, laparoscópica o laparotomía en caso de complicación severa.

Introduction. Endoscopic placement of biliary stents is becoming more common every day, as it is currently one of the best options for the treatment of bile duct pathologies. One of the complications that can occur is the migration of the endoprostheses in up to 10.8% of patients, which in very rare cases can cause intestinal perforation. Clinical case. This is a 61-year-old female patient, who underwent endoscopic retrograde cholangiopancreatography five years ago for choledocholithiasis. She consulted due to abdominal pain, with a physical examination that upon palpation documented an acute abdomen and a palpable plastron in the left iliac fossa. The computed tomography revealed a foreign body at the level of the descending colon, with perforation. Exploratory laparotomy and colostomy were performed due to perforation of the sigmoid colon secondary to migrated biliary prosthesis. Results. The patient progressed favorably and six months later the colostomy was closed without complications. Conclusions. Patients who receive biliary stents require adequate follow-up to avoid complications that, although rare, may occur, such as intestinal migration with intestinal perforation. The treatment of these complications can be endoscopic, laparoscopic or laparotomy in case of severe complication.

Corneal reshaping: an experiment with a type I collagen-based vitrigel for remodeling porcine corneas / Remodelamento corneano: relato de um experimento com um vitrigel a base de colágeno tipo I para remodelamento de córneas porcinas

ABSTRACT Purpose: This study aimed to report an experiment designed to determine anatomical changes in porcine corneas following placement of a novel polymer implant into the cornea. Methods: An ex vivo porcine eye model was used. A novel type I collagen-based vitrigel implant (6 mm in diameter) was shaped with an excimer laser on the posterior surface to create three planoconcave shapes. Implants were inserted into a manually dissected stromal pocket at a depth of approximately 200 μm. Three treatment groups were defined: group A (n=3), maximal ablation depth 70 μm; Group B (n=3), maximal ablation depth 64 μm; and group C (n=3), maximal ablation depth 104 μm, with a central hole. A control group (D, n=3) was included, in which a stromal pocket was created but biomaterial was not inserted. Eyes were evaluated by optical coherence tomography (OCT) and corneal tomography. Results: Corneal tomography showed a trend for a decreased mean keratometry in all four groups. Optical coherence tomography showed corneas with implants placed within the anterior stroma and visible flattening, whereas the corneas in the control group did not qualitatively change shape. Conclusions: The novel planoconcave biomaterial implant described herein could reshape the cornea in an ex vivo model, resulting in the flattening of the cornea. Further studies are needed using in vivo animal models to confirm such findings.

RESUMO Objetivo: Relatar um experimento projetado para determinar alterações anatômicas em córneas porcinas após a colocação de um novo implante de polímero na córnea. Métodos: Foi utilizado olho de porco ex vivo. Um novo agente modelador biocompatível, de colágeno tipo 1, com 6mm de diâmetro foi moldado com excimer laser em sua face posterior, para criar três formatos planocôncavos. Os implantes foram inseridos dentro de um bolsão, dissecado manualmente, a 200 micrômetros (μm). Foram definidos três grupos de tratamento: grupo A (n=3), teve a profundidade máxima de ablação de 70 μm; o grupo B (n=3), profundidade máxima de ablação de 64 μm; e o grupo C (n=3), profundidade máxima de ablação de 104 μm, com buraco central. O grupo controle, D (n=3), foi incluído, com a criação do bolsão estromal, porém sem inserir o material. A avaliação desses olhos foi realizada por tomografia de coerência óptica (OCT) e por tomografia corneana. Resultados: A tomografia corneana mostrou uma tendência para diminuição da ceratometria média em todos os 4 grupos. A tomografia de coerência óptica mostrou córneas com implantes localizados no estroma anterior e aplanamento visível, enquanto as córneas não mudaram qualitativamente o formato no grupo controle. Conclusões: O novo implante de biomaterial planocôncavo descrito aqui foi capaz de remodelar a córnea em modelo de animal ex vivo, resultando no aplanamento corneano. Novos estudos são necessários usando modelos animais in vivo para confirmar tais achados.

Pars plana vitrectomy combined with pan-retinal photocoagulation, Ahmed glaucoma valve implantation, and/or phacoemulsification for complicated neovascular glaucoma treatment / Vitrectomia pars plana combinada com fotocoagulação panretiniana, implantação da válvula Ahmed para glaucoma e/ou facoemulsificação para tratamento de glaucoma neovascular complicado

ABSTRACT Purpose: To present long-term results of pars plana vitrectomy combined with pan-retinal endolaser photocoagulation, Ahmed glaucoma valve implantation, and/or phacoemulsification in patients with complicated neovascular glaucoma. Methods: The study comprised 15 eyes from 15 patients with neovascular glaucoma as a complication of diabetic retinopathy and owing to ischemic central retinal vein occlusion. There was a vitreous hemorrhage n all of the patients. Furthermore, 8 of the cases showed varying degrees of hyphema. All subjects received an intravitreal injection of bevacizumab three days before surgery. In 12 phakic patients, phacoemulsification, pars plana vitrectomy, and Ahmed glaucoma valve implantation were performed. Pars plana vitrectomy and Ahmed glaucoma valve implantation were performed in 3 pseudophakic patients. Perioperative and postoperative complications, intraocular pressure values, and best-corrected visual acuity scores were also recorded. Results: The mean follow-up was 24.4 ± 14.56 months. The mean preoperative intraocular pressure was 50.06 ± 7.6 mmHg. At 1 day, 7 days, and 1-, 3-, 6-, 12-month, and last visit following surgery, the mean intraocular pressure was 11.06 ± 8.22, 12.66 ± 7.27, 13.8 ± 7.73, 18.64 ± 7.05, 19.28 ± 4.61, 16.28 ± 1.68, and 16.92 ± 2.12 mmHg, respectively (p=0.001 for every follow-up visit). The mean visual acuity on the most recent appointment was 1.18 ± 0.42 logMar (p=0.001 for each subsequent visit). As postoperative early complications, varying degrees of hyphema and fibrin reactions were recorded. During follow-up, one patient developed phthisis bulbi. In 4 cases, Ahmed glaucoma valve revision surgery was required. Conclusions: In patients with complicated neovascular glaucoma, combined surgical procedures are safe, effective, and preferable both in terms of controlling high intraocular pressure and providing reasonable visual abilities.

RESUMO Objetivo: Apresentar nossos resultados de longo período de vitrectomia pars plana combinada com fotocoagulação panretiniana com endolaser, implantação da válvula Ahmed para glaucoma e/ou facoemulsificação em pacientes com glaucoma neovascular complicado. Métodos: Foram incluídos no estudo 15 olhos de 15 pacientes com glaucoma neovascular como complicação da retinopatia diabética e devido à oclusão isquêmica da veia central da retina. Todos os casos tiveram hemorragia vítrea. Além disso, 8 dos casos apresentaram diferentes graus de hifema. A injeção intravítrea de bevacizumabe foi administrada em todos os casos 3 dias antes da cirurgia. Facoemulsificação, vitrectomia pars plana e implantação da válvula Ahmed para glaucoma foram realizadas em 12 pacientes fáquicos. A vitrectomia pars plana e a implantação da válvula Ahmed para glaucoma foram realizadas em 3 pacientes pseudofáquicos. Complicações perioperatórias e pós-operatórias, valores de pressão intraocular e valores de melhor acuidade visual corrigida pré-operatório e pós-operatório foram registrados. Resultados: O acompanhamento médio foi de 24,4 ± 14,56 meses. A média da pressão intraocular pré-operatória foi de 50,06 ± 7,6 mmHg. Em 1 dia, 7 dias e 1,3,6,12 meses, e última visita após cirurgia, a média da pressão intraocular foi de 11,06 ± 8,22, 12,66 ± 7,27, 13,8 ± 7,73, 18,64 ± 7,05, 19,28 ± 4,61, 16,28 ± 1,68 e 16,92 ± 2,12 mmHg, respectivamente (p=0,001 para cada visita de acompanhamento). A média da acuidade visual na última visita foi de 1,18 ± 0,42 logMar (p=0,001 para cada visita de acompanhamento). Vários graus de reações de hifema e fibrina foram registrados como complicações precoces pós-operatórias. Phthisis bulbi foi desenvolvido em um caso durante o acompanhamento. A cirurgia de revisão da válvula Ahmed para glaucoma foi necessária em 4 casos. Conclusões: Os procedimentos cirúrgicos combinados que realizamos são seguros, eficazes e preferenciais, tanto em termos de controle da alta pressão intraocular quanto fornecimento de habilidades visuais razoáveis em pacientes com glaucoma neovascular complicado.

The intra- and inter-rater reproducibility of bone level measurements at strategic mini-implants using dental panoramic radiography

Abstract Objectives: This experimental study focused on the intra- and inter-rater reproducibility of vertical bone level (VBL) measurements at strategic mini-implants (MI) using digital panoramic radiographs (PR). Study design: VBLs of 152 MIs for removable partial denture stabilization at 50 randomly chosen PRs from a clinical trial were digitally evaluated by three ratters. Rater deviations exceeding 0.5 mm were re-examined. The intra-class correlation coefficient (ICC) was applied to estimate reliability. The smallest detectable change (SDC) was interrelated to the minimal clinically important change of 0.2 mm. Results: The first measurement round revealed intra- and inter-rater ICCs of > 0.8. However, 28 sites (9 %) were unreadable, and 97 sites (32 %) revealed differences between observers of ≥ 0.5 mm. Following a consensus session and re-training, an additional 8 sites were excluded and all remaining VBL differences were ≤ 0.5 mm. Thus, the SDCs with 95 % credibility were improved from 0.73 to 0.31 mm in the intra-rater and from 1.52 to 0.34 mm in the interrater statistics. Given a 50 % credibility for this special setting, both the intra- and inter-rater SDCs were 0.11 mm. Conclusions: Digital PR can be reliably utilized to determine VBLs around MIs under conditions of at least two trained observers, mutual calibration sessions, and exclusion of unquantifiable radiographs. German Clinical Trials Register ID:DRKS00007589, www.germanctr.de

Evaluation of early ocular discomfort after glaucoma surgery: trabeculectomy versus Ahmed glaucoma valve implantation

ABSTRACT Purpose: This study aims to compare the initial ocular discomfort symptoms resulting from trabeculectomy and Ahmed glaucoma valve implantation surgeries. Methods: A prospective comparative study was conducted. The evaluation of ocular discomfort employed a questionnaire designed to identify the frequency and severity of distinct symptoms: ocular pain, general discomfort, tearing, foreign body sensation, and burning. This questionnaire was administered prior to surgery as a baseline, and subsequently at 7, 30, and 90 days post-surgery. Simultaneously, the Ocular Surface Disease Index (OSDI) was applied at these same time intervals. Results: The study encompassed a total of 17 patients (9 undergoing trabeculectomy and 8 undergoing Ahmed glaucoma valve implantation). The Ahmed glaucoma valve implantation group exhibited higher tearing levels at baseline (p=0.038). However, no statistically significant differences in symptoms were observed between the two surgeries at 7 and 30 days post-surgery. At the 90-day mark following surgery, patients who had undergone trabeculectomy reported a significantly higher foreign body sensation (p=0.004). Although OSDI scores did not differ between groups at baseline, the trabeculectomy group showed significantly higher OSDI scores than the Ahmed glaucoma valve implantation group at 7, 30, and 90 days after surgery (p<0.05). Conclusion: Post-surgery, patients who had undergone trabeculectomy experienced increased foreign body sensation. Trabeculectomy appears to cause greater early postoperative ocular discomfort compared to the Ahmed glaucoma valve implantation group.

Assessing peri-implant bone microarchitecture: conventional vs. osseodensification drilling - ex vivo analysis

Abstract: The aim was to evaluate primary implant stability and bone microarchitecture in two drilling situations, by comparing the conventional technique (CT) and osseodensification (OD) (Versah Burs - Jackson - Mississippi - USA). The implant insertion torque (IT), implant stability quotient (ISQ), and the peri-implant trabecular microstructure were assessed on bone fragments obtained from pig's tibia (n=12), divided between CT (n=6) and OD (n=6). After the drilling procedure, the implants were installed (3.5x8.5 mm, Epikut - SIN - São Paulo - Brazil). The IT and ISQ were measured using a digital torque wrench and resonance frequency analysis. Then, the bone fragments containing the implants were removed with a trephine and analyzed by Microtomography (µCT, 8.0 µm). The comparison between groups was performed using the unpaired t-test (α=0.05). The results revealed that OD promotes a higher insertion torque (CT: 7.67±2.44 Ncm; OD: 19.78±5.26 Ncm) (p=0.0005), although ISQ was not different (CT: 61.33±4.66; OD: 63.25±4.58) (p=0.48). There was a significant increase in peri-implant bone volume (CT: 23.17±3.39 mm3; OD: 32.01±5.75 mm3) (p=0.008), and trabecular parameters: separation (CT: 0.4357±0.03 mm; OD: 0.3865±0.04 mm) (p=0.0449), number (CT: 1.626±0.18 1/mm; OD: 1.946±0.13 1/mm) (p=0.007), and thickness (CT: 0.1130±0.009 mm; OD: 0.1328±0.015 mm) (p=0.02). Structure model index (SMI) data demonstrate no significant differences between groups (CT: 1.7±0.2; OD: 1.4±0.4) (p=0.12). In conclusion, OD increases the insertion torque values and promotes beneficial changes regarding bone microarchitecture compared with CT, revealing more peri-implant bone volume with consequent higher primary stability.

Resumo O objetivo deste estudo foi avaliar a estabilidade de implante e a microarquitetura óssea em duas técnicas de fresagem, comparando a técnica convencional (CT) e a osseodensificação (OD) (Versah Burs - Jackson - Mississippi - EUA). O torque de inserção do implante (IT), quociente de estabilidade primária (ISQ) e a estrutura trabecular peri-implantar foram avaliados em fragmentos ósseos obtidos de tíbia de porco (n=12), divididos entre CT (n=6) e OD (n=6). Após o procedimento de fresagem, foram instalados implantes (3,5x8,5 mm, Epikut - SIN - São Paulo - Brasil). O IT e o ISQ foram aferidos por meio de um torquimetro digital e análise de frequência de ressonância. Em seguida, os fragmentos ósseos contendo os implantes foram removidos com trefina e analisados ​​por microtomografia computadorizada (µCT, 8,0 µm). A comparação entre os grupos foi realizada por meio do teste-t não-pareado (α=0.05). Os resultados revelaram que a OD promove maior torque de inserção (CT: 7,67 ± 2,44º Ncm; OD: 19,78 ± 5,26 Ncm) (p=0,0005), embora a estabilidade primária não tenha sido diferente (CT: 61.33 ± 4.66; OD:63.25 ± 4.58) (p=0,48). Houve um aumento significativo no volume ósseo peri-implantar (CT: 23,17±3,39 mm3; OD: 32,01±5,75 mm3) (p=0,0089) e parâmetros trabeculares: separação (CT: 0,4357 ± 0,03 mm; OD: 0,3865 ± 0,04 mm) (p=0,0449), número (CT: 1,626 ± 0,18 1/mm; OD: 1,946 ± 0,13 1/mm) (p=0,007) e espessura (CT: 0,1130 ± 0,009 mm; OD: 0,1328 ± 0,015 mm) (p=0,02) O índice de modelo estrutural (SMI) não demostrou diferença estatisticamente significativa (p=0.1228). Concluindo, OD apresenta maiores valores de torque de inserção e promove mudanças benéficas na microarquitetura óssea em comparação com a TC, revelando maior volume ósseo peri-implantar.

Nanotopography and oral bacterial adhesion on titanium surfaces: in vitro and in vivo studies

Abstract The present study aimed to evaluate the influence of titanium surface nanotopography on the initial bacterial adhesion process by in vivo and in vitro study models. Titanium disks were produced and characterized according to their surface topography: machined (Ti-M), microtopography (Ti-Micro), and nanotopography (Ti-Nano). For the in vivo study, 18 subjects wore oral acrylic splints containing 2 disks from each group for 24 h (n = 36). After this period, the disks were removed from the splints and evaluated by microbial culture method, scanning electron microscopy (SEM), and qPCR for quantification of Streptococcus oralis, Actinomyces naeslundii, Fusobacterium nucleatum, as well as total bacteria. For the in vitro study, adhesion tests were performed with the species S. oralis and A. naeslundii for 24 h. Data were compared by ANOVA, with Tukey's post-test. Regarding the in vivo study, both the total aerobic and total anaerobic bacteria counts were similar among groups (p > 0.05). In qPCR, there was no difference among groups of bacteria adhered to the disks (p > 0.05), except for A. naeslundii, which was found in lower proportions in the Ti-Nano group (p < 0.05). In the SEM analysis, the groups had a similar bacterial distribution, with a predominance of cocci and few bacilli. In the in vitro study, there was no difference in the adhesion profile for S. oralis and A. naeslundii after 24 h of biofilm formation (p > 0.05). Thus, we conclude that micro- and nanotopography do not affect bacterial adhesion, considering an initial period of biofilm formation.

Ozone therapy improves early stages of osseointegration in ovariectomized rats

Abstract Objective the aim of this study was to analyze the influence of ozone therapy (OZN) on peri-implant bone repair in critical bones by installing osseointegrated implants in the tibia of ovariectomized rats. Methodology ovariectomy was performed on 30 Wistar rats, aged six months (Rattus novergicus), and, after 90 days, osseointegrated implants were installed in each tibial metaphysis. The study groups were divided into the animals that received intraperitoneal ozone at a concentration of 700 mcg/kg — OZ Group (n=15) — and a control group that received an intraperitoneal saline solution and, for this reason, was named the SAL group (n=15). The applications for both groups occurred during the immediate post-operative period on the 2nd, 4th, 6th, 8th, 10th, and 12th day post-surgery. At various stages (14, 42, and 60 days), the animals were euthanized, and tests were performed on their tibiae. These tests include histomorphometric and immunohistochemical analyses, computerized microtomography, sampling in light-cured resin for calcified sections, and confocal microscopy. The obtained data were then analyzed using One-way ANOVA and the Shapiro-Wilk, Kruskal-Wallis, and student t-tests (P<0.05). Results our findings indicate that the OZ group (3.26±0.20 mm) showed better cellular organization and bone neoformation at 14 days (SAL group, 0.90±1.42 mm) (P=0.001). Immunohistochemistry revealed that osteocalcin labeling was moderate in the OZ group and mild in the SAL group at 14 and 42 days post-surgery. The data from the analysis of calcified tissues (microtomography, histometric, and bone dynamism analysis) at 60 days showed no statistically significant differences between the groups (P=0.32). Conclusion it was concluded that ozone therapy anticipated the initial phases of the peri-implant bone repair process.

Abordajes de una molestia periimplantar

Los implantes dentales se han convertido en un componente rutinario de la práctica dental diaria. A la vez, pueden producir molestias, destrucción desenfrenada de la salud bucal o reemplazo quirúrgico y costoso de un implante fallido. La detección temprana de la pérdida ósea marginal es vital para la planificación del tratamiento y el pronóstico de los implantes. Estos están diseñados para adaptarse mejor a los diversos tipos de hueso y fallan debido a muchas razones. Entender los desafíos y las expectativas del paciente a través de la honestidad, es una parte importante del tratamiento, cuyo éxito no solo dependerá de los integrantes del equipo implantológico o de técnica, sino también del cuidado del paciente al realizar su higiene diaria. Por esa razón, se realizó una búsqueda bibliográfica en las bases de datos MEDLINE y PubMed sobre molestias periimplantar, consultándose 30 referencias de los últimos cinco años.

Dental implants have become a routine component of daily dental practice. At the same time, they can cause discomfort, rampant destruction of oral health, or expensive surgical replacement of a failed implant. Early detection of marginal bone loss is vital for treatment planning and implant prognosis. These are designed to best fit various bone types and fail due to many reasons. Understanding the patient's challenges and expectations through honesty is an important part of the treatment, whose success will not only depend on the members of the implantology or technical team, but also on the patient's care when performing their daily hygiene. For this reason, a bibliographic search was carried out in the MEDLINE and PubMed databases on peri-implant discomfort, consulting 30 bibliographical references from the last 5 years.

Aesthetic effect evaluation of the xenogeneic collagen matrix in keratinized mucosa augmentation around dental implants / 口腔疾病防治

Objective@#To evaluate the stability and aesthetic effect of a xenogeneic collagen matrix (mucograft) on achieving an adequate keratinized mucosa width (KMW) around implants and to provide a reference basis for the clinical application of xenogeneic collagen matrix materials.@*Methods@#The hospital ethics committee approved the study protocol, and the patients provided informed consent. Twenty patients with a KMW<2 mm at the buccal implant site who were treated in Binzhou Medical University Affiliated Yantai Stomatological Hospital from July 2020 to September 2022 were included, and a total of 36 implants were included. The mean age of the patients was (52.0±10.4) years, of which 18 were females and 2 were males. They were divided into a free gingival graft group (FGG, control group) and a xenogeneic collagen matrix group (test group) according to different graft materials. The incremental effect of the KMW on the buccal side of the implant and the mucosal shrinkage rate was measured at 1 month and 3 months after the operation. The mucosal scar index (MSI) was evaluated after the operation.@*Results@#At 3 months postoperatively, the KMW was (3.67 ± 1.06) mm in the control group and (2.96 ± 0.98) mm in the test group, and the difference was statistically significant (t = 2.076, P<0.05). The KMW shrinkage rate was (33.34 ± 16.30) % in the test group and (22.05 ± 15.47) % in the control group at 1 month postoperatively and (51.95 ± 12.60) % in the test group and (37.44 ± 16.30) % in the control group at 3 months postoperatively, with statistically significant differences between the two groups at the same time points (P<0.05). Three months after surgery, the test group showed significantly better outcomes than the control group in terms of the five scar indicators (scar width, scar convexity, scar color, scar trace, and overall appearance), and the difference was statistically significant (P<0.05).@*Conclusion@#Xenogeneic collagen matrix can increase the peri-implant KMW and achieve a more natural and coordinated soft tissue aesthetic effect but with a higher shrinkage rate.

Fatores de risco consequentes a complicações no pósoperatório da mastoplastia de aumento primária com implantes de silicone: Estudo retrospectivo / Risk factors resulting from complications in the postoperative period of primary breast augmentation with silicone implants: Retrospective study

Introdução: A mamoplastia de aumento é uma das cirurgias plásticas mais realizadas no mundo. Tendo em vista sua alta aplicabilidade, é fundamental conhecer os fatores de risco relacionados à incidência de complicações pós-operatórias a fim de reduzilas nesse tipo de procedimento. Método: Este estudo é retrospectivo feito por meio da análise dos prontuários de 76 pacientes que realizaram mamoplastia de aumento primária com implantes de silicone durante os meses de janeiro de 2018 a dezembro de 2020. Resultados: Observou-se que a presença de comorbidades aumentou a incidência de complicações pós-operatórias precoces (p<0,001), mas não de complicações pósoperatórias tardias (p=0,8). O maior tempo cirúrgico também aumentou a incidência de complicações pós-operatórias (p=0,005). Conclusão: A presença de comorbidades influencia diretamente na incidência de complicações pós-operatórias da mastoplastia de aumento e por esta razão deve-se realizar uma adequada compensação pré-operatória antes de submeter as pacientes a este procedimento cirúrgico.

Introduction: Breast augmentation is one of the most performed plastic surgeries in the world. Given its high applicability, it is essential to know the risk factors related to the incidence of postoperative complications to reduce them in this type of procedure. Method: This retrospective study analyzed the medical records of 76 patients who underwent primary breast augmentation with silicone implants from January 2018 to December 2020. Results: It was observed that the presence of comorbidities increased the incidence of early postoperative complications (p<0.001) but not of late postoperative complications (p=0.8). Longer surgical time also increased the incidence of postoperative complications (p=0.005). Conclusion: The presence of comorbidities directly influences the incidence of postoperative complications after breast augmentation, and for this reason, adequate preoperative compensation must be carried out before submitting patients to this surgical procedure.

Confecção de guia multifuncional para planejamento de reabilitação implantossuportada: relato de caso / Preparation of a multifuncional guide for the planning of implant-supported rehabilitations: case report / Elaboración de una guía multifuncional para la planificación de rehabilitación implantosoportada: informede caso

Introdução:Em busca da estética e da função mastigatória,é cada vez mais crescente aprocurapor reabilitações implantossuportadas. O guia multifuncional surgepara orientar a disponibilidade óssea e contribuir no planejamento da instalação tridimensional dos implantes, seguindo os princípios do planejamento reverso.Objetivo:Descrever, por meio de um caso clínico, a possibilidade de obtenção de resultados de excelente previsibilidade em coroas unitárias implantossuportadas, por meio do uso de guias multifuncionais, no planejamento do início ao fim de tratamento.Relato decaso:Paciente A.M.F, 44 anos, sexo feminino, compareceu à clínica de Prótese dentária do Departamento de Odontologia/UFRN com queixa de insatisfação da sua prótese removível e harmonia do sorriso. Ao exame clínico e radiográfico, observou-se ausência do elemento 12, apresentando um espaço interoclusal de 5mm e distância médio-distal de 7mm. Foi confeccionado o guia em resina acrílica, o qual foi preenchido o espaço desdentado com um dente de estoque. Em seguida, o dente deste guia teve seu centro perfurado com uma broca esférica para peça reta na região de cíngulo e com isso, preenchida com guta percha em bastão. Após isso, o paciente foi encaminhado para realizar uma tomografia computadorizada cone beam com o guia multifuncional em posição.As imagens obtidas permitiram o planejamento para instalação do implante, como inclinação e posicionamento favorável, bem como ausência de disponibilidade óssea na região. Além disso, o guia funcionou em outras etapas do tratamento da paciente, como na fase provisória.Conclusão:Os guias auxiliam em diversas fases do tratamento e permitem maior previsibilidade dos resultados em reabilitações protéticas unitárias implantossuportadas, apresentando-se como um dispositivo promissorpara ocorreto posicionamento do implante (AU).

Introduction:In search of esthetics and improved masticatory function, the demand for implant-supported rehabilitation is increasing. Multifunctional guides emerge to assess bone availability and help plan the three-dimensional installation of implants, following the principles of reverse planning. Objective:To describe, through a clinical case, the possibility of obtaining excellent predictability in implant-supported single crowns, through the use of multifunctional guides, inthe planning of a treatment from beginning to end. Case report:Patient A.M.F, 44 years old, female, came to the Prosthodontics clinic at the Department of Dentistry/UFRN complaining of dissatisfaction with her removable prosthesis and the harmony of her smile. Clinical and radiographic examination revealed the absence of element 12, with an interocclusal space of 5mm and a mid-distal distance of 7mm. The acrylic resin guide was made and the edentulous space was filled with a stock tooth. The center of theguide tooth was then drilled with a spherical straight-bit burr in the cingulum region and filled with gutta-percha stick. The patient was then referred for a cone beam computed tomography with the multifunctional guide in position. The images obtained allowed planning for implant installation, such as favorable inclination and positioning, as well as the absence of bone availability in the region. In addition, the guide was effective during other stages of the patient's treatment, such as the provisional phase.Conclusion:The guides assist in various phases of treatment and allow greater predictability of results in implant-supported single prosthetic rehabilitations, presenting themselves as a promising device for correct implant positioning (AU).

Introducción:En busca de estética y función masticatoria, la demanda de rehabilitaciones implantosoportadas es cada vez mayor. La guía multifuncional hasurgido para orientar la disponibilidad ósea y ayudar a planificar la instalación tridimensional de implantes, siguiendo los principios de la planificación inversa. Objetivo: Describir, a través de un caso clínico, la posibilidad de obtener una excelente predictibilidad en coronas unitarias implantosoportadas, mediante el uso de guías multifuncionales, en la planificación desde el início hasta el final del tratamiento. Informe de caso: Paciente A.M.F, 44 años, sexo femenino, compareció a la clínica de Prostodoncia del Departamento de Odontología/UFRN quejándose estar insatisfecha con su prótesis removible y con la armonía de su sonrisa. El examen clínico y radiográfico reveló la ausencia del elemento 12, con un espacio interoclusal de 5 mm y una distancia medio-distal de 7 mm. Se confeccionó una guía de resina acrílica y se rellenó el espacio edéntulo con un diente provisorio. A continuación, se perforó el centro del diente guía con una broca recta esférica en la región del cíngulo y se le rellenó con gutapercha en barra. Posteriormente, el paciente fue remitido a una tomografía computarizada cone beamcon la guía multifuncional en posición. Las imágenes obtenidas permitieron planificar la instalación del implante, como inclinación y posicionamiento favorables, así como la ausencia de disponibilidad ósea en la región. La guía también funcionó en otras fases del tratamiento del paciente, como en la fase provisional. Conclusión:Las guías ayudan en varias fases del tratamiento y permiten una mayor previsibilidadde los resultados en rehabilitaciones protésicas unitarias implantosoportadas, presentándose como un dispositivo prometedor para el correcto posicionamiento de los implantes (AU).

Prevalencia de cristales de colesterol en granulomas perirradiculares de origen endodóntico / Prevalence of cholesterol crystals in periradicular granulomas of endodontic origin

Resumen Objetivo Comparar dos procedimientos de soldadura convencionales empleando una aleación de Cr-Co, para conectar barras coladas seccionadas a ser fijadas sobre implantes. Materiales y métodos A partir de un modelo maestro que representa un maxilar desdentado con cuatro implantes, se confeccionaron veinte (n=20) probetas seccionadas en tres partes. Se conformaron dos grupos, cada uno con diez (n=10) ejemplares. Una vez acondicionadas, fueron atornilladas al modelo maestro. Su desajuste inicial se analizó utilizando una lupa estereoscópica, con una cámara incorporada y un software. Las partes fueron soldadas empleando un procedimiento diferente para cada grupo. Las correspondientes al Grupo I se invistieron en un block refractario a base de sílico-fosfato. Las del Grupo II se montaron en una estructura metálica Clever Spider. El desajuste fue mensurado y los resultados procesados estadísticamente. El nivel de significación fue establecido en p<0,05. Resultados El Grupo I tuvo un desajuste inicial de 97,30±13,81μm y el Grupo II de 98,53±11,24μm. Luego de la soldadura, el Grupo I registró 98,53±17,17μm, 1,23μm mayor respecto al inicial. En el Grupo II se observó 103,13±17,61μm, 4,60μm por encima del original. Se analizaron mediante prueba t de Student; en ambos casos el resultado fue de p>0,05. Al comparar entre sí los grupos I y II, por medio de la prueba t y de comprobación no paramétrica de Mann-Whitney, se observaron diferencias no significativas, p=0,41 y p=0,38 respectivamente. Conclusiones Bajo las condiciones de este estudio, se observó que los dos métodos de soldadura analizados fueron confiables para unir supraestructurasos metálicas sin que se afecte su ajuste final.

Abstract Aim Compare two conventional welding procedures using a Cr-Co alloy, to connect sectioned cast bars to be fixed on implants. Materials and methods From a master model representing a toothless jaw with four implants, twenty (n=20) specimens sectioned into three parts were made. Two groups were formed, each with ten (n=10) specimens. Once conditioned, they were screwed to the master model. Its initial mismatch was analyzed using a stereoscopic magnifier, with a built-in camera and a software. The parts were welded using a different procedure for each group. Those corresponding to Group I were invested in a refractory block based on silyl-phosphate. Those of Group II were mounted on a Clever Spider metal structure. The mismatch was measured, and the results processed statistically. The level of significance was established at p<0.05. Results Group I had an initial mismatch of 97.30 ±13.81μm, and Group II of 98.53±11.24μm. After welding, Group I registered 98.53±17.17μm, 1.23μm higher than the initial one. In Group II, 103.13±17.61μm was observed, 4.60μm above the original. They were analyzed using Student's t test; in both cases the result was p>0.05. When comparing groups I and II, using the t-test and the Mann-Whitney nonparametric verification, non-significant differences were observed, p=0.41 and p=0.38 respectively. Conclusions Under the conditions of this study, it was observed that the two welding methods analyzed were reliable for joining metallic superstructures without affecting their final fit.

Estudio in vitro del ajuste de supraestructuras pasivadas sobre implantes múltiples / In vitro study of the adjustment of passivated suprastructures on multiple implants

Resumen Objetivo Comparar dos procedimientos de soldadura convencionales empleando una aleación de Cr-Co, para conectar barras coladas seccionadas a ser fijadas sobre implantes. Materiales y métodos A partir de un modelo maestro que representa un maxilar desdentado con cuatro implantes, se confeccionaron veinte (n=20) probetas seccionadas en tres partes. Se conformaron dos grupos, cada uno con diez (n=10) ejemplares. Una vez acondicionadas, fueron atornilladas al modelo maestro. Su desajuste inicial se analizó utilizando una lupa estereoscópica, con una cámara incorporada y un software. Las partes fueron soldadas empleando un procedimiento diferente para cada grupo. Las correspondientes al Grupo I se invistieron en un block refractario a base de sílico-fosfato. Las del Grupo II se montaron en una estructura metálica Clever Spider. El desajuste fue mensurado y los resultados procesados estadísticamente. El nivel de significación fue establecido en p<0,05. Resultados El Grupo I tuvo un desajuste inicial de 97,30±13,81μm y el Grupo II de 98,53±11,24μm. Luego de la soldadura, el Grupo I registró 98,53±17,17μm, 1,23μm mayor respecto al inicial. En el Grupo II se observó 103,13±17,61μm, 4,60μm por encima del original. Se analizaron mediante prueba t de Student; en ambos casos el resultado fue de p>0,05. Al comparar entre sí los grupos I y II, por medio de la prueba t y de comprobación no paramétrica de Mann-Whitney, se observaron diferencias no significativas, p=0,41 y p=0,38 respectivamente. Conclusiones Bajo las condiciones de este estudio, se observó que los dos métodos de soldadura analizados fueron confiables para unir supraestructurasos metálicas sin que se afecte su ajuste final.

Abstract Aim Compare two conventional welding procedures using a Cr-Co alloy, to connect sectioned cast bars to be fixed on implants. Materials and methods From a master model representing a toothless jaw with four implants, twenty (n=20) specimens sectioned into three parts were made. Two groups were formed, each with ten (n=10) specimens. Once conditioned, they were screwed to the master model. Its initial mismatch was analyzed using a stereoscopic magnifier, with a built-in camera and a software. The parts were welded using a different procedure for each group. Those corresponding to Group I were invested in a refractory block based on silyl-phosphate. Those of Group II were mounted on a Clever Spider metal structure. The mismatch was measured, and the results processed statistically. The level of significance was established at p<0.05. Results Group I had an initial mismatch of 97.30 ±13.81μm, and Group II of 98.53±11.24μm. After welding, Group I registered 98.53±17.17μm, 1.23μm higher than the initial one. In Group II, 103.13±17.61μm was observed, 4.60μm above the original. They were analyzed using Student's t test; in both cases the result was p>0.05. When comparing groups I and II, using the t-test and the Mann-Whitney nonparametric verification, non-significant differences were observed, p=0.41 and p=0.38 respectively. Conclusions Under the conditions of this study, it was observed that the two welding methods analyzed were reliable for joining metallic superstructures without affecting their final fit.

Instalação de implante em região posterior de maxila através da técnica de Summers e osseodensificação: relato de caso / Implant installation in posterior maxilla using the Summers technique and osseodensification: a case report / Instalación de implantes en la región posterior del maxilar utilizando la técnica de Summers y la oseodensificación: informe de un caso

Este trabalho tem por objetivo relatar um caso em que foi realizada a técnica de Summers para elevação do seio maxilar, associada à realização de osseodensificação. Paciente do gênero masculino, 53 anos, apresentando ausência do dente 17, com altura reduzida na área edêntula. Foi realizada a elevação do seio maxilar pela técnica de Summers associada à osseodensificação da região para uma melhora da qualidade óssea. Foi instalado um implante cone morse SIN de 3.8 x 8.5 com torque de 45 newtons. No acompanhamento pós-operatório não houve qualquer sinal ou sintoma de complicação e o paciente foi reabilitada com uma prótese parafusada sobre implante.

This study aims to report a case in which the Summers technique was performed for maxillary sinus elevation, associated with osseodensification. Male patient, 53 years old, with missing tooth 17, with reduced height in the edentulous area. Maxillary sinus elevation was performed using the Summers technique associated with osseodensification of the region for an improvement in bone quality. A 3.8 x 8.5 SIN morse taper implant with a torque of 45 newtons was installed. In the postoperative follow-up, there were no signs or symptoms of complications and the patient was rehabilitated with a screw-retained implant prosthesis.

Este trabajo tiene como objetivo informar de un caso en el que se realizó la técnica de Summers para la elevación del seno maxilar, asociada a la osteodensificación. Paciente varón, de 53 años, que presenta ausencia del diente 17, con altura reducida en la zona edéntula. Se elevó el seno maxilar mediante la técnica de Summers asociada a la osteodensificación de la región para mejorar la calidad ósea. Se instaló un implante morse cónico de 3,8 x 8,5 SIN con un par de 45 newtons. En el seguimiento postoperatorio no hubo signos ni síntomas de complicación y el paciente fue rehabilitado con una prótesis atornillada sobre un implante.

Physical-chemical influences and cell behavior of natural compounds on titanium dental surfaces

Abstract The present study evaluated the influence of carvacrol, terpinene-4-ol, and chlorhexidine on the physical-chemical properties of titanium surfaces, cell viability, proliferation, adhesion, and spreading of fibroblasts and osteoblasts in vitro. Titanium surfaces (Ti) were treated with Carvacrol (Cvc), Terpinen-4-ol (T4ol), Chlorhexidine (CHX), DMSO, and ultrapure water (Control group). Physical-chemical modifications were evaluated by surface wettability, the surface free energy (SFE) calculated from the contact angle values using the Owens-Wendt-Rabel-Kaeble (OWRK) equation, scanning electron microscopy (SEM) and energy dispersive spectrometry probe (EDS) system. Cells were seeded onto Ti-treated surfaces and incubated for 24 h and 72 h, then evaluated by Alamar blue assay and fluorescence microscopy. Surfaces treated with Cvc and T4ol showed the presence of Na, O, and Cl. All surfaces showed hydrophilic characteristics and SFE values between 5.5 mN/m and 3.4 mN/m. On the other hand, EDS peaks demonstrated the presence of O and Cl after CHX treatment. A reduction of cell viability and adhesion was noted on titanium surfaces treated with CHX after 24 and 72h. In conclusion, the results indicate that the decontamination with Cvc and T4ol on Ti surfaces does not alter the surface proprieties and allows an adequate interaction with cells involved in the re-osseointegration process such as fibroblasts and osteoblasts.

Resumo O presente estudo avaliou a influência do carvacrol, terpineno-4-ol e clorexidina nas propriedades físico-químicas de superfícies de titânio, viabilidade celular, proliferação, adesão e esplhamento de fibroblastos e osteoblastos in vitro. Superfícies de titânio (Ti) foram tratadas com Carvacrol (Cvc), Terpinen-4-ol (T4ol), Clorexidina (CHX), DMSO e água ultrapura (Grupo Controle). As modificações físico-químicas foram avaliadas pela molhabilidade da superfície, a energia livre de superfície (ELS) calculada a partir dos valores do ângulo de contato usando a equação de Owens-Wendt-Rabel-Kaeble (OWRK), microscopia eletrônica de varredura (MEV) e espectroscopia de raios X por energia dispersiva (EDS). As células foram semeadas em superfícies tratadas com Ti e incubadas por 24 h e 72 h, e avaliadas pelo ensaio Alamar blue e microscopia de fluorescência. As superfícies tratadas com Cvc e T4ol mostraram a presença de Na, O e Cl. Todas as superfícies apresentaram características hidrofílicas e valores de ELS entre 5,5 mN/m e 3,4 mN/m. Por outro lado, os picos de EDS demonstraram a presença de O e Cl após o tratamento com CHX. Uma redução da viabilidade celular e adesão foi observada em superfícies de titânio tratadas com CHX após 24 e 72h. Em conclusão, os resultados indicam que a descontaminação com Cvc e T4ol em superfícies de Ti não altera as propriedades da superfície e permite uma interação adequada com células envolvidas no processo de reosseointegração como fibroblastos e osteoblastos.

Alternativas de reconstrucción mamaria inmediata

La mastectomía total por cáncer de mama produce una deformidad importante en las pacientes, con alteraciones severas de su autoestima, imagen corporal, sexualidad, y calidad de vida en general. El gold estándar en los países desarrollados es la reconstrucción mamaria inmediata y, actualmente existen pocas contraindicaciones absolutas para realizar alguna técnica de reconstrucción. Este artículo se describen las opciones reconstructivas (colgajos e implantes), tiempos de reconstrucción, ventajas y desventajas de ambas técnicas, potenciales complicaciones, y se propone un algoritmo de tratamiento. La elección de la técnica de reconstrucción debería ser decidida entre la paciente y su cirujano/a, considerando características físicas, factores relacionados con la enfermedad y tratamiento oncológico, y preferencias de las pacientes.

Total mastectomy for breast cancer treatment can be a cause of deformity and distress for patients, with severe impairment of self-esteem, body image, sexuality, and quality of life. In developing countries, immediate breast reconstruction is the gold standard, and there are only a few absolut contraindications for some technique of breast reconstruction. This article describes reconstructive options (flaps and allo-plastic material), reconstructive timing, pros and cons of both techniques, potential complications, and an algorithm of treatment is proposed. Choice of the reconstructive technique should be decided by the patient and her surgeon, considering physical characteristics, factors related with the disease and oncologic treatments, and patients' preferences.

Influencia de la higiene bucal en el estado de salud de los tejidos periimplantarios / Influence of oral hygiene on peri-implant tissue health status

Introducción: el estado de salud de los tejidos periimplantarios es de vital importancia en el éxito de la rehabilitación implantosoportada, por esta razón, es necesario observar todos aquellos factores que contribuyen a mantener este estado y dentro de ellos, principalmente: la higiene bucal. Objetivo: determinar la influencia de la higiene bucal en el estado de salud de los tejidos periimplantarios. Métodos: se realizó un estudio descriptivo, observacional y transversal en el servicio de Prótesis de la Facultad de Estomatología de Villa Clara, en el período comprendido entre los años 2017 y 2019. El universo de estudio estuvo constituido por 45 pacientes portadores de rehabilitaciones implantosoportadas; las unidades de análisis fueron los implantes y los tejidos que rodean a las 85 prótesis fijas realizadas a dichos pacientes que cumplieron con los criterios de inclusión. Se emplearon la observación clínica y radiográfica, y se elaboró un formulario como instrumento. Se evaluó la higiene bucal y el estado de los tejidos periimplantarios como principales variables. La información obtenida se recopiló en una base de datos, se procesó y se sometió a pruebas de independencia (el estadígrafo Ji cuadrado y su posibilidad asociada) para mostrar la relación entre las variables. Resultados: las variables analizadas evidenciaron una relación significativa de la higiene bucal con el estado de salud de los tejidos periimplantarios a favor de la buena higiene y los tejidos sanos. Conclusiones: la buena higiene bucal evidenciada contribuyó a que los tejidos periimplantarios se mantuvieran sanos.

Introduction: peri-implant tissue health state is of vital importance in the success of implant-supported rehabilitation; for this reason, it is necessary to observe all those factors that contribute to maintaining this state, mainly oral hygiene. Objective: to determine the influence of oral hygiene on peri-implant tissue health status. Methods: a descriptive, observational and cross-sectional study was carried out in the Prosthesis service at the Dental Faculty of Villa Clara between 2017 and 2019. The universe of study consisted of 45 patients with implant-supported rehabilitations; the units of analysis were the implants and the tissues surrounding the 85 fixed prostheses performed on those patients who met the inclusion criteria. Clinical and radiographic observations were used, and a form was developed as an instrument. Oral hygiene and peri-implant tissue state were evaluated as the main variables. The information obtained was compiled in a database as well as processed and subjected to independence tests (the Chi-square statistic and its associated possibility) to show the relationship among the variables. Results: the analyzed variables showed a significant relationship between oral hygiene and the peri-implant tissue health status in favour of good hygiene and healthy tissues. Conclusions: the evidenced good oral hygiene contributed to the maintenance of healthy peri-implant tissues.